This modern 3-story office building utilized nearly 18,000 square feet of Alucobond Aluminum Composite Material (ACM). Panel system is pressure equalized - rain screen system. Designers also incorporated ACM panels at the interior lobby to form a unique transition from exterior to interior of building.
The AEI office building was designed with a 1-1/8" thick foam core laminated between 2 metal skins. The core provided insulation and a rigid surface where the metal skins were laminated. A concealed gasket was used at the horizontal side joint and an exposed gasket was used at the vertical joints.
Building addition using Dri-design Architectural Wall Panels in running bond pattern. Panels are dri-joint pressure equalized rain screen. Panels are .080" aluminum custom sized and custom color.
Both phases of Tetrionics feature the use of Reynobond Aluminum Composite Material (ACM) and ribbed steel siding by Metecno Morin to create a seamless but contrasting effect between the exterior siding materials.
The Boldt Company moved their Central Wisconsin office from Schofield to Stevens Point. APW was selected to furnish and install aluminum composite panels at the exterior canopies and above the conference room windows. The panel was used in combination with brick and glass. A wet seal joint was selected.
Alply's panel was selected for its flatness, insulating value and dry joint. The side joint has a wet seal concealed from view. It utilized a cured silicone gasket on the exterior as a weather seal. The space between the wet and dry seal acted as a gutter to remove any condensation from the panel joinery. The wall panels on the curved wall are segmented with panel attachments occurring within the vertical joint only.
